Manufactured as a fibreglass shell and then hand covered in premium grade vinyl, this is a very close match to the original item. As fitted to the Pre Aeroflow cars

Manufactured as an exact replica of your original product, produced from fibreglass and finished with our unique grained patter, that matches our rear door cards.

This item will fit all MK1 Escort Variants, including 4 door vehicles

Mk1 Escort RS2000 centre console manufactured in grained fibreglass  as per the original item in 4 pieces and supplied with

a premium grade gaiter fitted with the correct chrome gearstick cap.

This will not fit wide tunnel conversions

Made from our injection mould tooling these are an exact replica of the original product and can be supplied in either Black or Putty.

Unfortunately these only fit 2 - door vehicles

Wow our massive front end kit, designed to replace or add the components your missing to complete your rebuild.

Including the following items

Full MK1 console, Under dash trays, Switch panel complete with ash tray assembly and a full complement of switch housings

Injection moulded and the correct colour great, these sun visor clips as an easy DIY fit.

Can be supplied with or without new replacement screws

Our injection moulded parts are an exact replica of the original items, right down to the printed decal on the black rocker.

These housings are for the following models, Mexico, RS1600, 1300 Sport and a variety of other MK1’s that have the 5 switches, the kit also includes a blanking plate, to block the additional switch panel hole.

Here we have combined our top selling rear shelf with our best price rear cards, in a superb kit that not only represents excellent value for money but also the best parts available.

We have sold over 200 of these kits making it one of our tops sellers

Our injection moulded external door gaskets are correct in every dimension, including the outer raised edge that fits snugly over the door handle.

Supplied in a pack of four pieces to complete a pair of doors, if you have a 4 - door vehicle please add an additional item to your basket

Our MK1 Escort "Works" Double Dash Top, our replica Works Rally dash for the MK1 Escort, capable of housing a variety of components.

Such as the MK1 Binnacle, or a couple of blank filler panels to hold time pieces and a set of gauges of your choice

Our Works Dash supplied with 2 blank binnacles, for you to select and fit gauges of your choice and also timing pieces on the navigators side, cemeterial so each filler panel fits either side they can be interchangeable if you wish.

Nothing like this available anywhere, so a unique part from us offering optimum quality and finish. The dash has been hand trimmed in premium grade vinyl, with the detective centre strap, where Ford cut two dash tops and joined them with a piece of tape.

You can opt for 2 blank binnacles or 1 blank binnacle if you wish

Injection moulded product, that is secured at the front of your car replacing the old bakerite product.

Our assembly is a full unit and includes the outer housing, Inner ash tray and securing bracket with new cigarette stub.

The outer housing dimensions are as follows: width 135mm x height 40mm, there is an overhang on the face of the housing that sits into the aperture of your front switch panel.

This is a fibreglass dash top, covered in our premium grade sating grained vinyl, simply the best dash top on the market.

Available in either Left or Right Hand Drive

Manufactured as a fibreglass shell and then hand covered in premium grade vinyl - almost indistinguishable from the original item.

Classic Mini 4 Gauge Sash Top, currently under development, housing 4 × 52mm gauges of your choice and finished in our unique grained fiberglass coating. Ideal if you are looking to house additional gauges for your high performance engine.

Gauges NOT supplied

You can send us an email for product reservation or pre order sales@classictrim.co.uk

MK2 Escort (4 door) rear parcel shelf - manufactured in fibreglass, with the original finish

Available in Black or Dark Brown

MK1 Escort 1300E / Sport Coin Tray (with or without silver edge trim) and supplied with a premium grade gaiter fitted with the correct chrome gearstick cap

Available in either RHD or LHD, these under dash trays are the best available and come fitted with the front rail

Mexico / RS2000 front door panels.

Manufactured as per the original item using high frequency welded vinyl to create the exact replica finish with hard board back.

We can also supply Twin Cam panels - please email for delivery dates of these products sales@classictrim.co.uk

As these are made to order, please allow us up to 4 weeks for deliver, or call to receive stock availability please

Our injection moulded switch housing are an identical replacement to your existing worn switch housing, an easy DIY swap over will bring your switches back to life.

Kit comprises of the following items: Head Light Housing, Brake test Housing, Wiper, Fan, HRW, Hazard.

Please note - you will be taking your existing switch internals and fitting them into your new replacement housing

Our injection moulded front Ash Tray Housing complete with new securing bracket is a direct replacement of your existing bakerite product.

An ideal replacement if your housing is chipped or broken and an eyesore what you look at the front panel of the car. really easy DIY change over and the housing is supplied with a new securing backet.

Ash Tray Housing measurement are 135mm wide x 40m heigh

RS2000 Lower Switch Panel complete with 6 switch housings

All correct switch housings including, Head Light, HRW, Brake Test, Hazard, Fan and Wiper housings

Simply swap over your existing internal components

Manufactured in hardboard with the correct drivers side map pocket fitted

These panels come with a fir tree clip set

Our rear panels are cut ready to fit your existing ash trays and have our unique grained pattern to match our rear parcel shelf’s.

Possibly the best value product vs. anything available

Our Series 2 Cortina Rear Shelf has our unique grained fibreglass finish.

Small amount of fettling required to fit, (some small drill holes and a couple of small slots)

These usually crumble as they were made from hardboard and not susceptible to extreme temperature changes and rain. So we manufactured this in fibreglass and its an exact replica of the old product

Manufactures as a fibreglass grade finished dash top.

This is the top and bottom dash rail as one kit, some fettling is required on this dash to fit switches and gauges.

Manufactured as a fibreglass shell and then hand covered in premium grade vinyl, this dash houses 3, 52mm gauges of your choice. Excellent item if you wan to add a few more gauges for oil pressure, temp or just a centre clock.

Fits all 3 bolt left or right hand vehicles.

Gauges NOT suppled.

Possibly the best replica rear parcel shelf for the MK 1 Capri, available anywhere

Manufactured with the correct twin row of vents to the rear with no distortion or warping

Manufactured as an exact replica, here we have our naked lower switch panel.

Supplied with our injection moulded full ash tray assembly

Manufactured from a fibreglass shell and then hand trimmed in premium grade vinyl, this dash replicates the Lotus Cortina dash. Allowing you to place 4, 52mm gauges of your choice in the centre of that dash.

Ideal if your running a high performance engine and want to know the working temperatures of the engine or other specifics.

Gauges NOT supplied.

Manufactured from a fibreglass shell and then covered with our unique grained pattern, this is an idea replacement for your original dash. The centre ash tray has been removed.

MK2 Escort RS2000 rear parcel shelf - manufactured from our unique grained fibreglass with the correct turned edges, available in either black or brown.

Please note this will NOT fit 4 door vehicles

Mk2 RS2000 centre console, manufactured from GRP and supplied in either Brown or Black

Our blank binnacles are designed to allow you to house any gauges of your choice and time pieces that you may wish to add, especially designed for the higher performance engine that will not run with the standard binnacle

Manufactured in our unique grained fibreglass this Works Panel can house a selection of gauges or switches of your choice.

It’s easy to cut and therefore ideal if you want to produce a custom set up with the items of your choice sitting directly above the gearbox tunnel

RS2000 Lower Switch Panel complete with 6 switch housings

All correct switch housings including, Head Light, HRW, Brake Test, Hazard, Fan and Wiper housings

Simply swap over your existing internal components

All injection moulded parts, comprising of the following items.

Head Light, Heater, Wiper, Hazard, HRW, Brake Test, 2 x Spot Light Housings

Please Note - you need to change your internal switch components and fit them into your new switch housings

Again manufactured via injection moulding, this Binnacle was fitted to the Twin Cam and also the early GT version.

an identical replica to the original product this should be an easy DIY swap

Please note - The Binnacle is Only available in RHD

As fitted to the MK2 Escort and also Many Versions of the Ford Capri

This is an excellent injection moulded part to replace your worn or missing mirror cover

MK1 Escort rear shelf and under dash trays, combined as a kit and come ready to fit

A perfect combination of parts and quality at the best value

Our injection moulded gear stick gaiter cap is often worn and the plastic chrome has faded - not on this one, it’s brand new and ready to fit onto your gaiter.

An easy DIY swap over

Our MK1 Escort moulded carpet is amongst the best of the best, moulded to take the contours of your floor pan, this will fit as per the original item.

Uncut for the gearstick, so will fit 1600 and 2000cc engines including type 9 gearboxes.

Comes supplied with a basic underlay kit.

Unfortunately this will not fit large gearbox tunnels or the Automatic variant of the MK1 Escort

These are manufactured to order so please allow up to 4 weeks delivery

Please contact us to place an order sales@classictrim.co.uk

Here we have added our injection moulded C Pillar trims to our MK2 Escort rear shelf, enabling you to pick up a saving vs. purchasing these items individually.

Available in either black, or with the dark brown rear shelf and putty C Pillar trims

A great saving and a couple of fantastic products

Manufactured to hide gaps in your lower switch panel

Manufactured via our injection moulded process, this ash tray unit will fit all Classic Fords with the original housing measuring 130mm width x 70mm depth

Comes supplied with a new cigarette stub and ready to fit into your original housing

Our injection moulded switch housings complete with printed rocker are an ideal easy DIY replacement of your old existing worn switch. By request we have listed these individual items so you can chose what items you want to replace.

All of our switch housings are fitted into the correct housing, so for example, the head light has the correct curved body and the spot light housing is a single position switch. if you require a different set up please send a message with your order

All prices for one switch housing and you can add as many as you wish

Our injection moulded binnacle to replace your existing unit is an exact replica in every way and is indistinguishable from the original item